Installation and building

NOTE: the following instructions assume a Unix-like system with a command line. If your development environment is different (e.g. Visual Studio), these steps cannot be followed verbatim. Some IDEs, like Visual Studio, have CMake integration built into them. In some other environments, you may have to use the CMake GUI or your system’s command line. To build a CMake project without make, use cmake --build ..

scnlib uses CMake for building. If you’re already using CMake for your project, integration is easy with find_package.

$ mkdir build
$ cd build
$ cmake ..
$ make -j
$ make install
# Find scnlib package
find_package(scn CONFIG REQUIRED)

# Target which you'd like to use scnlib
# scn::scn-header-only to use the header-only version
add_executable(my_program ...)
target_link_libraries(my_program scn::scn)

Tests and benchmarks

To build and run the tests and benchmarks for scnlib, clone the repository, and build it with CMake.

Building and running tests:

$ mkdir build
$ cd build
$ cmake -DCMAKE_BUILD_TYPE=Debug ..
$ make -j
$ ctest -j4

Building and running the runtime performance benchmarks:

# create build directory like above
$ make -j

# disable CPU frequency scaling
$ sudo cpupower frequency-set --governor performance

# run the benchmark of your choosing
$ ./benchmark/runtime/integer/bench-int

# re-enable CPU frequency scaling
$ sudo cpupower frequency-set --governor powersave

Without CMake

Headers for the library can be found from the include/ directory, and source files from the src/ directory.

Building and linking the library:

$ mkdir build
$ cd build
$ c++ -c -I../include/ ../src/*.cpp
$ ar rcs libscn.a *.o

libscn.a can then be linked, as usual.

# in your project
$ c++ ... -Lpath-to-scn/build -lscn

When building as header-only, src/ has to be in the include path, and SCN_HEADER_ONLY must be defined to 1: In this case, a separate build stage obviously isn’t required

# in your project
$ c++ ... -Ipath-to-scn/include -Ipath-to-scn/src -DSCN_HEADER_ONLY=1

Basic usage

scn::scan can be used to parse various values from a source range.

A range is an object that has a beginning and an end. Examples of ranges are string literals, std::string and std::vector<char>. Objects of these types, and more, can be passed to scn::scan. To learn more about the requirements on these ranges, see the API documentation on source ranges.

After the source range, scn::scan is passed a format string. This is similar in nature to scanf, and has virtually the same syntax as std::format and {fmt}. In the format string, arguments are marked with curly braces {}. Each {} means that a single value is to be scanned from the source range. Because scnlib uses variadic templates, type information is not required in the format string, like it is with scanf (like %d).

After the format string, references to arguments to be parsed are given.

// Scanning an int
int i;
scn::scan("123", "{}", i);
// i == 123

// Scanning a double
double d;
scn::scan("3.14", "{}", d);
// d == 3.14

// Scanning multiple values
int a, b;
scn::scan("0 1 2", "{} {}", a, b);
// a == 0
// b == 1
// Note, that " 2" was not scanned,
// because only two integers were requested

// Scanning a string means scanning a "word" --
//   that is, until the next whitespace character
// this is the same behavior as with iostreams
std::string str;
scn::scan("hello world", "{}", str);
// str == "hello"

Compare the above example to the same implemented with std::istringstream:

int i;
std::istringstream{"123"} >> i;

double d;
std::istringstream{"3.14"} >> d;

int a, b;
std::istringstream{"0 1 2"} >> a >> b;

std::string str;
std::istringstream{"hello world"} >> str;

Or with sscanf:

int i;
std::sscanf("123", "%d", &i);

double d;
std::sscanf("3.14", "%lf", &d);

int a, b;
std::sscanf("0 1 2", "%d %d", &a, &b);

// Not really possible with scanf!
char buf[16] = {0};
std::sscanf("hello world", "%15s", buf);
// buf == "hello"

Error handling and return values

scnlib does not use exceptions. The library compiles with -fno-exceptions -fno-rtti and is perfectly usable without them.

Instead, it uses return values to signal errors. This return value is truthy if the operation succeeded. Using the .error() member function more information about the error can be gathered.

scn::scan and others are marked with [[nodiscard]]-attributes, so not checking the return value will cause a compiler warning.

If an error occurs, the arguments that were not scanned are not written to. Beware of using possibly uninitialized variables.

int i;
// "foo" is not an integer
auto result = scn::scan("foo", "{}", i);
// fails, i still uninitialized
if (!result) {
    std::cout << result.error().msg() << '\n';

Unlike with scanf, partial successes are not supported. Either the entire scanning operation succeeds, or a failure is returned.

int a, b;
// "foo" is still not an integer
auto result = scn::scan("123 foo", "{} {}", a, b);
// fails -- result == false
// a is written to, a == 123
// b is still uninitialized

Oftentimes, the entire source range is not scanned, and the remainder of the range may be useful later. The leftover range can be accessed with the member function .range().

int i;
auto result = scn::scan("123 456", "{}", i);
// result == true
// i == 123
// result.range() == " 456"

result = scn::scan(result.range(), "{}", i);
// result == true
// i == 456
// result.range() == ""

The return type of .range() is a valid range, but it is of an library-internal, user-unnameable type. Its type is not the same as the source range. If possible for the given source range type, the .reconstruct() member function can be used to create a range of the original source range type. Note, that .reconstruct() is not usable with string literals.

std::string source{"foo bar"};
std::string str;
auto result = scn::scan(source, "{}", str);
// result == true
// str == "foo"
// result.reconstruct() == " bar"

The result type has some additional useful member functions. These include:

  • .empty(): returns true if the leftover range is empty, meaning that there are definitely no values to scan from the source range any more.

  • .range_as_string(), .range_as_string_view(), and .range_as_span(): like .reconstruct(), except they work for every contiguous range, and return a value of the type specified in the function name

See the API documentation for more details.

To enable multiple useful patterns, the library provides a function scn::make_result. This function will return the result object for a given source range, that can be later reassigned to. For example:

auto result = scn::make_result("foo");
int i;
if (result = scn::scan(result.range(), "{}", i)) {
    // success
    // i is usable
} else {
    // failure
    // result contains more info, i not usable


auto result = scn::make_result("123 456");
int i;
while (result = scn::scan(result.range(), "{}", i)) {
    // success
    // i is usable:
    // iteration #1: i == 123
    // iteration #2: i == 456
// failure
// can either be an invalid value or EOF
// in this case, it's EOF
// i not modified, still i == 456

Files and stdin

To easily read from stdin, use scn::input or scn::prompt. They work similarly scn::scan.

// Reads an integer from stdin
int i;
auto result = scn::input("{}", i);

// Same, but with an accompanying message sent to stdout
int i;
auto result = scn::prompt("Write an integer: ", "{}", i);

To use scn::scan with stdin, use scn::cstdin(). It returns a scn::file&, which is a range mapping to a FILE*.

int i;
auto result = scn::scan(scn::cstdin(), "{}", i);

scn::input and scn::prompt sync with <cstdio> automatically, so if you wish to mix-and-match scn::input and scanf, it’s possible without any further action. scn::scan and scn::cstdin() don’t do this, but you must explicitly call scn::cstdin().sync() when synchronization is needed.

int i, j;
scn::input("{}", i);
std::scanf("%d", &j);

int i, j;
scn::scan(scn::cstdin(), "{}", i);
scn::cstdin().sync(); // needed here, because we wish to use <cstdio>
std::scanf("%d", &j);

You can also scan from other file handles than stdin. You can either use scn::file or scn::owning_file, depending on if you want to handle the lifetime of the FILE* yourself, or let the library handle it, respectively.

auto f = std::fopen("file.txt", "r");
scn::file file{f};
// file now unusable

scn::owning_file file{"file.txt", "r"};

Both scn::file and scn::owning_file are valid source ranges, and can be passed to scn::scan and other scanning functions. scn::owning_file is a child class of scn::file, so scn::owning_file& -> scn::file& is a valid conversion.

There’s also scn::mapped_file for easier management of memory mapped files, see the API documentation for more.

Other scanning functions


Oftentimes, specific parsing configuration through the format string is not required. In this case, scn::scan_default can be used. Using it has some performance benefits, as a format string doesn’t need to be parsed.

Using scn::scan_default with N args has the same semantics as using scn::scan with a format string with N space-separated "{}" s.

int a, b;
auto result = scn::scan_default("123 456", a, b);
// result == true
// a == 123
// b == 456

// Equivalent to:
int a, b;
auto result = scn::scan("123 456", "{} {}", a, b);


If you only wish to scan a single value with default options, you can avoid using output arguments by using scn::scan_value. The return value of scn::scan_value<T> contains a .value() member function that returns a T if the operation succeeded.

auto result = scn::scan_value<int>("123");
// result == true
// result.value() == 123

As is evident by the presence of an extra member function, the return type of scan_value is not the same as the one of scan. The return type of scan inherits from scn::wrapped_error, but the return type of scan_value inherits from scn::expected<T>. To use make_result with scan_value, this needs to be taken into account:

auto result = scn::make_result<scn::expected<int>>(...);
result = scn::scan_value<int>(result.range());

The return types of scan and scan_value are not compatible, and cannot be assigned to each other.

Localization: scn::scan_localized

By default, scnlib isn’t affected by changes to the global C or C++ locale. All functions will behave as if the global locale was set to "C".

A std::locale can be passed to scn::scan_localized to scan with a locale. This is mostly used with numbers, especially floats, giving locale-specific decimal separators.

Because of the way std::locale is, parsing with a locale is significantly slower than without one. This is because the library effectively has to use iostreams for parsing.

// Reads a localized float
double d;
auto result = scn::scan_localized(std::locale{"fi_FI.UTF-8"}, "2,73", "{}", d);
// result == true
// d == 2.73

Because scan_localized uses iostreams under the hood, the results will not be identical to scn::scan, even if std::locale::classic() was passed.


scn::getline works similarly to std::getline. It takes a range to read from, a string to read into, and optionally a delimeter character defaulting to '\n'.

std::string line;
auto result = scn::getline("first\nsecond\nthird", line);
// result == true
// line == "first"
// result.range() == "second\nthird" (note that the delim '\n' is skipped)

// setting '\n' explicitly
result = scn::getline(result.range(), line, '\n');
// result == true
// line == "second"
// result.range() == "third"

// delim doesn't have to be '\n' or even whitespace
result = scn::getline(result.range(), line, 'r');
// result == true
// line == "thi"
// result.range() == "d"

If the string to read into passed to scn::getline is a scn::string_view, and the source range is contiguous, the string_view is modified to point into the source range. This increases performance (no copying or memory allocations) at the expense of lifetime safety.

std::string source = "foo\nbar";
scn::string_view line;
auto result = scn::getline(source, line);
// result == true
// line == "foo"
// result.range() == "bar"
// == (point to the same address -- `line` points to `source`)

scn::ignore_until and scn::ignore_until_n

scn::ignore_until_n is like std::istream::ignore. It takes an integer N and a character C, and reads the source range until either N characters were read or character C was found from the source range.

scn::ignore_until works in the same way, except the only condition for stopping to read is finding the end character. This is effectively equivalent to passing std::numeric_limits<std::ptrdiff_t>::max() as N to scn::ignore_until_n.

scn::scan_list and temporaries

To easily scan multiple values of the same type, scn::scan_list can be used. It takes a source range and a container to write the scanned values to. Its return type is similar to that of scn::scan.

std::vector<int> list;
auto result = scn::scan_list("123 456 789", list);
// result == true
// list == [123, 456, 789]

For more customization, scn::scan_list_ex can be used. It takes a third parameter, of type scn::scan_list_options, which can set a delimeter and an until-character. For easier use, factory functions scn::list_delimeter, scn::list_until, and scn::list_delimeter_and_until exist.

The delimeter character can be set to skip a character, like a comma, between list items.

std::vector<int> list;
auto result = scn::scan_list_ex("123, 456, 789", list, scn::list_delimeter(','));
// result == true
// list == [123, 456, 789]

scn::scan_list will read until an invalid value or delimeter is found, or the source range is exhausted. Reading can also be stopped by setting an until-character.

std::vector<int> list;
auto result = scn::scan_list_ex("123 456 789\n123", list, scn::list_until('\n'));
// result == true
// list == [123, 456, 789]
// result.range() == "123"

If you’ve already allocated memory for the list, scan_list and scan_list_until can be passed a scn::span. Because the container must be passed to scan_list as an lvalue reference, the span must be constructed separately, which can be tedious. The library provides some helpers for this.

// Doing everything explicitly
std::vector<int> list(64, 0);
auto span = scn::make_span(list);
auto result = scn::scan_list("123 456 789", span);
// result == true
// list == span == [123, 456, 789]

// Using scn::temp
// Takes an rvalue and makes it usable as an argument to scanning functions requiring an lvalue reference
// Useful with spans and other views
std::vector<int> list(64, 0);
auto result = scn::scan_list("123 456 789", scn::temp(scn::make_span(list)));
// result == true
// list == span == [123, 456, 789]

// Using scn::make_span_list_wrapper
// Takes a container and returns a span into it, already wrapped with scn::temp
// Effectively equivalent to the example above
std::vector<int> list(64, 0);
auto result = scn::scan_list("123 456 789", scn::make_span_list_wrapper(list));
// result == true
// list == span == [123, 456, 789]

scn::temp can be also utilized elsewhere

std::vector<char> buffer(64, 0);
// Reads up to 64 chars into the buffer
auto result = scn::scan_default(source, scn::temp(scn::make_span(buffer)));

User types

To scan a value of a program-defined type, specialize scn::scanner. There’s a helper function for this purpose, scn::scan_usertype. In addition to other already familiar parameters, it takes a scanning context that it uses to scan the value, instead of a source range.

struct int_and_double {
    int i;
    double d;

template <>
struct scn::scanner<int_and_double> : scn::empty_parser {
    template <typename Context>
    error scan(int_and_double& val, Context& ctx)
        return scn::scan_usertype(ctx, "[{}, {}]", val.i, val.d);

// ...

int_and_double val;
auto result = scn::scan("[123, 3.14]", "{}", val);
// result == true
// val.i == 123
// val.d == 3.14

The above example inherits from scn::empty_parser. This implements the format string functionality for this type. scn::empty_parser is a good default choice, as it only accepts empty format strings. You could also inherit from other scanner types (like scn::scanner<int>), or implement parse() by hand (see reader.h in the library source code). There’s also scn::common_parser and scn::common_parser_default, see the API documentation for more information on those.

Should you need more direct control, you could use the scanning functions, like scn::scan directly. In this case, make sure to assign the returned range into the scanning context. This is because these scanning functions create their own internal context that does not sync with the caller.

// This is equivalent to the scanner::scan implementation above
auto r = scn::scan(ctx.range(), "[{}, {}]", val.i, val.d);
ctx.range() = std::move(r.range());
return r.error();

Alternatively, you could also include the header <scn/istream.h>. This enables scanning of types with a std::istream compatible operator>>. Using this functionality is discouraged, as using iostreams to scan these values presents some difficulties with error recovery, and will lead to worse performance.

Specializing scn::scanner should be preferred over relying on <scn/istream.h>.

Tuple-based scanning API

By including <scn/tuple_return.h>, you’ll get access to an alternative API, which returns the scanned values in a tuple instead of output parameters. See Rationale for why this is not the default API.

These functions are slightly slower compared to their output-parameter equivalents, both in runtime and compile time.

#include <scn/tuple_return.h>

// Way more usable with C++17 structured bindings
// Can also be used without them
auto [result, i] = scn::scan_tuple<int>("123", "{}");
// result == true
// i == 123


string vs string_view vs span<char>

Three types that at first glance might appear quite similar, have significant differences what comes to how they’re scanned by the library.

std::string works very similarly to how it works with <iostream>. It scans a “word”: a sequence of letters separated by spaces. More precisely, it reads the source range into the string, until a whitespace character is found or the range reaches its end.

span<char> works like it copies bytes from the range into the buffer it’s pointing to.

string_view works like std::string, except it doesn’t copy, but changes its data pointer to point into the source stream. Scanning a string_view works only with contiguous ranges, and may lead to lifetime issues, but it will give you better performace (avoids copying and allocation).

scn::string_view source{"hello world"};

std::string str;
scn::scan(source, "{}", str);
// str == "hello"

scn::string_view sv;
scn::scan(source, "{}", sv);
// sv == "hello"
// == -- sv points to source
// Make sure that `source` outlives `sv`

std::vector<char> buffer(5, '\0'); // 5 bytes, all zero
scn::span<char> s = scn::make_span(buffer);
scn::scan(source, "{}", s);
// s == buffer == "hello"
// Reads 5 bytes, doesn't care about whitespace
// No lifetime problems, the data is copied into the span/the buffer it points to

Wide ranges

Source ranges have an associated character type, either char or wchar_t. This character type is determined by the type of deferencing an iterator into the range, which is either CharT or scn::expected<CharT>. For most use cases, this type is char. In this case, the range is said to be narrow. If the character type is wchar_t, the range is said to be wide.

The return types of scanning narrow and wide ranges are incompatible and cannot be mixed.

char, std::string, scn::string_view, and scn::span<char> cannot be scanned from a wide range. wchar_t, std::wstring, scn::wstring_view, and scn::span<wchar_t> cannot be scanned from a narrow range.

Wide ranges are useful if your source data is wide (often the case on Windows). Narrow ranges should be preferred if possible, however.

Character encoding

The library assumes, that all narrow ranges are UTF-8, and all wide ranges are UTF-16 or UTF-32, depending on sizeof(wchar_t). This holds, whether or not a std::locale is used.

To scan a Unicode code point, use scn::code_point:

The encoding of wide ranges is assumed to be whatever is set in the global C locale. The encoding must be ASCII-compatible.